Tag Archives: cabinets

Putting the Mudroom on the Final Spin Cycle

With the window trim and mudroom seating in place, it was time to focus our attention on the cabinets surrounding the washer and dryer. As with any project in this house, we wanted to do it on the cheap. We spent alot of time researching cabinets, both online and some that were available in-store. One consideration was to order cabinets through Ikea, but since we haven’t been there yet to lay our hands on them, we didn’t want to spend the money on something that we weren’t quite sure of the quality. The option that we ended up going with was this unfinished oak cabinet from Home Depot. The drawer slides and hinges weren’t the best of quality, but we figure that these cabinets won’t get a ton of use. And with a few coats of paint they should look pretty decent.

You may remember that we chose to paint the mudroom a shade of blue (Woodlawn Sterling Blue). For the cabinets we wanted to go with something that wasn’t white, but would still have a bright appearance. We went with this color called Montpelier Madison White.


With so few cabinets to paint, I ended buying just a quart. It did the job of covering really well.
The cabinets aren’t packaged that great for transit, so I needed to putty a bunch of scratches and dings. Not a big deal considering the price.

The joys of painting in the winter means you end up painting in your dining room. Maybe our first project should have been to build a garage?

And here is what they look like after a few coats of paint.


I had a little bit of help from Miles when I was painting. Every time I painted over the lines he would beep at me. I think he might be an artist in training.


Installing the cabinets only required contorting my body above the washer and dryer.

I had to add a small piece of trim to the top of the cabinets to fill the gap from the crown molding. This is mostly due to poor planning on my part, but if anyone asks, I’m going to tell them that I did it on purpose.

And here they are! We found our drawer pull and door knobs at Lowes.

The only thing missing was the countertop. Sara and I had talked about having a piece of granite cut, but we ended up just using some scrap bamboo I had laying around from our stairway project. The treads were just the right thickness to give it a butcher block look. I cut them down to size and used a biscuit joiner to put the pieces together.

I never pass up the opportunity to use my router , so I routed the corners of the countertop to give it some detail.

After a few coats of polyurethane and the addition of a few LED under-cabinet lights, the project was nearing completion.




Filed under Uncategorized